Control Line Straightening Tool

Control Line Straightening Tool

The Control Line Straightening Tool is designed to straighten short lengths of control lines manufactured from all varieties of CRA alloys and sizes from ¼”OD to ¾”OD bare line, encapsulated line and multi-line flat packs. Its principal use is for precision straightening over short intervals to be coned and threaded for Butech/Autoclave connections. A secondary use is for general straightening and removal of “kinks” to allow the lines to have good conformance alongside tubing strings.

The Control Line Straightening Tool l employs hydraulic pressure to operate a ram that close contoured plastic die sets on tubing in need of straightening. Dies are custom-made specifically for each size and grade of tubing. Typical die closure force is in the range of 1,000 lbf to 3,000 lbf. Dies can also be fabricated from high-strength aluminum if required.

*The Control Line Straightening Tool is not designed to produce “straight stick” lengths of tubing.

GET A QUOTE
PHC Hydrus Tools Logo
Control Line Straightening Tool

How It Works

The control line straightening tool employs hydraulic pressure to operate a ram that close contoured plastic die sets on tubing in need of straightening. Dies are custom made specifically for each size and grade of tubing. Typical die closure force is in the range of 1,000 lbf to 3,000 lbf. Dies can also be fabricated from high-strength aluminum if required.

Control Line Straightening Tool
Control Line Straightening Tool

Components

  • A hydraulic power unit (HPU) that generates hydraulic energy from a compressed air source.
  • A control line straightening tool that grips tubing requiring straightening and re-shapes it by re-forming its curvature.
  • A hydraulic hose bundle to deliver pressurized oil to the straightener unit and returns it to the HPU.
Model NumberDescription
PHC-HYD-STRAIGHTStraightening Tool
PHC-HYD-B-TSI-.2501/4" Insert for Staightening Tool (Bare Line)
PHC-HYD-B-TSI-.3753/8" Insert for Staightening Tool (Bare Line)
PHC-HYD-B-TSI-.5001/2" Insert for Staightening Tool (Bare Line)
PHC-HYD-B-TSI-.6255/8" Insert for Staightening Tool (Bare Line)
PHC-HYD-E-TSI-.2501/4" Insert for Staightening Tool (Encap sulated line)
PHC-HYD-E-TSI-.3753/8" Insert for Staightening Tool (Encap sulated line)
PHC-HYD-E-TSI-.5001/2" Insert for Staightening Tool (Encap sulated line)
PHC-HYD-E-TSI-.6255/8" Insert for Staightening Tool (Encap sulated line)

Can’t Find The Product You Need? Just Ask Us!

You May Also Like

Speed-Safe Control Line Clamp PHC Hydrus Tools

Speed-Safe Control Line Clamp

Speed-Safe Control Line Clamp

The Speed-Safe Control Line Clamp is a line of tools specifically designed for handling and securing encapsulated or bare lines. They are designed to quickly attach to any section of a control line and create a non-slip grip that allows tension up to 1,500 lbs.  They can be attached to both bare or encapsulated control lines with outside diameters from 1/4” to 5/8” and grips flat-pack lines with cross-sections up to 1-3/16” by 1-1/2”.

GET A QUOTE
PHC Hydrus Tools Logo
Speed-Safe Control Line Clamp PHC Hydrus Tools

Speed-Safe Control Line Clamp Benefits

  • Promotes safety and streamlines operation.
  • Can be used to tie-down control lines.
  • Allows control lines and TEC lines to be secured and tied-off in seconds
  • Field proven clamping device in offshore applications
  • Reusable.
  • Significantly reduces critical path operations and rig time.

Speed-Safe Control Line Clamp Options

Model NumberDescription
PHC-HYD-HET-SPEED CLAMP-1Complete Speed-Safe Clamp Assembly

Can’t Find The Product You Need? Just Ask Us!

You May Also Like